Some surprising facts about India’s green energy

by Manshu on September 23, 2010

in Economy

Countries and companies alike are focusing a lot of their attention on green technologies, and lately I’ve been reading up on what India is doing to generate power by green technologies. I am interested in this space because I believe that countries that achieve breakthroughs in green technologies will rule this century, and because I hadn’t heard much about what India was doing in this space, I was wondering if in fact India was doing anything at all. What I found surprised me, probably because I knew so little, but I bet as you read on through – a lot of these findings will surprise you as well.

Solar Power

First off,  I was surprised to read that India has got quite an ambitious target of generating 20,000 MW of solar power by 2022 under the Jawahar Lal Nehru Solar National Solar Mission. This plan is split out into phases and the target is to achieve a 1,000 MW of solar energy by 2013 (end of first phase).

I couldn’t find reliable stats on the current solar power generation in the country, but whatever numbers I found indicated that it is quite low  today. While solar power may not be too big right now – there are companies that are working on this like Azure Power which aims to generate 100 MW from Solar Power in the next 3 – 5 years, and Tata Power which plans to generate 50 MW from a solar power project in Gujarat.

How India compares to other countries?

This recent report by Deutsche Bank shows the break-up of renewable electric power generation of various countries.

image

The chart shows you that Wind and Biomass have the highest presence in India, and incidentally the recent IPO by Orient Green Power also  focuses on this segment.

I keep reading a lot about how well China is doing in this space so I was a little surprised to see that the major contributor for them was Small Hydro, and even they don’t have any solar power. The huge green bar in China also brings me to my next question – what the heck is Small Hydro?

Small Hydro

The other thing that jumps at you from the above chart is small hydro and how China is so far ahead on this. Small Hydro is hydroelectric power generation at  smaller scale of less than 25 MW.  These are classified green because they have low impact due to the minimum reservoir and civil construction requirement.  As you can see from the table below India has has been adding to its Small Hydro generation constantly, but there is still a long way to go as far as catching up with China is concerned.

Year Target

(in MW)

Capacity addition during the year

(in MW)

Cumulative SHP installed capacity

(in MW)

2002-03 80 80.39 1519.28
2003-04 80 84.04 1603.32
2004-05 100 102.31 1705.63
2005-06 130 120.80 1826.43
2006-07 160 149.16 1975.59
2007-08 200 205.25 2180.84
2008-09 250 248.93 2429.77

As far as states go, Karnataka is doing way better than anyone else as seen in the numbers below:

Sl. No.

State

Projects Installed Projects under Implementation
Nos. Capacity (MW) Nos. Capacity (MW)
1 Andhra Pradesh 59 180.83 12 21.50
2 Arunachal Pradesh 81 61.32 43 25.94
3 Assam 4 27.1 4 15.00
4 Bihar 12 54.60 4 3.40
5 Chattisgarh 5 18.050 1 1.00
6 Goa 1 0.050
7 Gujarat 2 7.000 2 5.60
8 Haryana 5 62.700 1 6.00
9 Himachal Pradesh 79 230.915 9 26.75
10 J&K 32 111.830 5 5.91
11 Jharkhand 6 4.050 8 34.85
12 Karnataka 83 563.45 14 85.25
13 Kerala 19 133.87 2 3.2
14 Madhya Pradesh 10 71.16 4 19.90
15 Maharashtra 29 211.325 5 31.20
16 Manipur 8 5.450 3 2.75
17 Meghalaya 4 31.030 3 1.70
18 Mizoram 18 24.470 1 8.50
19 Nagaland 10 28.670 4 4.20
20 Orissa 8 44.300 6 23.93
21 Punjab 29 123.900 2 18.75
22 Rajasthan 10 23.850
23 Sikkim 16 47.110 2 5.20
24 Tamil Nadu 15 90.050 4 13.00
25 Tripura 3 16.010
26 Uttar Pradesh 9 25.100
27 Uttarakhand 93 127.92 33 40.35
28 West Bengal 23 98.400 16 79.25
29 A&N Islands 1 5.250
Total 674 2429.77 188 483.23

Conclusion

To place these numbers in context you need to know how much does renewable energy contribute to the total?

The current installed base of renewable energy is 10.12% of the total installed base, which is a bit higher than I thought it would be, but as far as potential goes, it can be scaled up quite a bit.

I sure hope this percentage goes up in future, and as does the absolute value of total electricity generated. This is an area which deserves a lot of attention and interest from policy makers, private companies and general public alike, but unfortunately gets very little attention from anyone at all.

After all, how many of you knew about the Ministry of New and Renewable Energy ?

{ 3 comments… read them below or add one }

Gaurav Palvia September 23, 2010 at 9:18 pm

A very refreshing article. A topic heard on a constant basis but very few know abt it.

Reply

Manshu September 24, 2010 at 2:45 am

Thanks Gaurav. It was quite refreshing for me to read about it, and get to learn more about the topic. Overall my feel was that things are being done in this area, and I was happy to read that the private sector has some projects underway that help it. For some reason I thought there’d be more solar stuff going on, and was a bit disappointed couldn’t find anything about it.

Reply

Sivaram Kumar September 23, 2010 at 9:23 pm

No one services the industrial maintenance-repair and overhaul (MRO) markets better than we do. From anti-seize compounds to torque wrenches, from high temperature gasketing products to testing and thread repair products, we are the only one-source supplier of Maintenance-Repair-Overhaul (MRO) consumables in your region. Lets take a look at what’s in store with us:

Anti-seize Compounds
Molykote® 1000, the industry standard anti-seize when you require uniform torque-tension even after repeated assemblies, to the ultra-pure all OEs recommended Molykote P 37, it’s all available with us. Press-fit of turbine blades or just to prevent fretting, assembly pastes from Molykote make sure you spend less money in wear related repairs. Project Sales Corp also services the core industries in steel, cement, paper and mining with one of the most exhaustive range of proven greases for the most critical applications, backed by condition monitoring support and periodic inspections.

Sealing Compounds
When you want 100% sealed, you trust Hylomar M from Marston Domsel GmbH approved by all OEs. Unlimited shelf life as well as assembly time, this oil resistant high temperature gasketing compound ensures your pedestal bearing parting planes are sealed until your major overhauls. Extensively used by turbine overhaul compaies, original equipment manufacturers and power stations across India. Available in 80 ml imported tubes. Imported and Marketed by Project Sales Corp.

Gasketing at > 650 deg C
Metal-to-metal joints as in turbine parting planes, are best sealed with the well known Birkosit Sealing Compound. Available in original 1 kg lacquer lined tins, these products have a temperature resistance of over 650 deg C. Imported by Project Sales Corp and sold to over 70 power plants and overhaul companies.

NDT Products
We are a one-stop shopping for all your NDT needs. Be it visible or fluorescent dye penetrants, from large automated systems to small power packs, Magnaflux NDT products available from us for detection of surface discontinuities and cracks ensure the smallest and finest cracks get noticed. What more, the products are available with a technical back up from ITW India as reliability is critical to the inspection process.

Reliable Thread Repairs
We have the quickest and simplest method to repair stripped or damaged threads. That not only returns the thread to the original size, but is also stronger than the original female thread. Recoil Thread Repair Kits and inserts, available in all sizes and materials (304, 316, Inconel, etc) ensure you get a stronger assembly than conventional drilling and tapping.

Maintenance and Repair Epoxies
Precision maintenance and metal repair epoxies, allow fast, economical repairs to plant equipment, reducing downtime and returning it to service within hours. Project Sales Corp has a full service line of metal and maintenance repair epoxies for emergency repairs. What more, they are available from us with technical back-up for the right application, a very critical factor for their successful performance.

Quick Maintenance Sprays
Don’t break your head over a nut. Whether it’s a disassembly of heavily rusted stud, or ensuring moving parts move even at the highest of loads and temperatures, Project Sales Corp has one of the most exhaustive range of maintenance aerosols from world renowned companies like CRC, BTS, Dow Corning, Permatex, WD-40 to ensure your downtime is minimized and shutdown jobs are completed on-time.

Trust and Reliability
If you have a problem, we have a solution. This unique offering with one of the most exhaustive range of maintenance products from one source has allowed us to service over 70 power plants, many large steel mills, refineries, oil and gas companies and overhaul service providers everytime they have a need. From captive power, to large thermal plants and O&M contractors, we provide the dependable and reliable service built on over 7 years of trust. From proven products to usage support services, core industries rely on us to minimize downtime and extend their equipment life.

Explore your options with us.â„¢

Write to us today at

Project Sales Corp, 28 Founta Plaza, Suryabagh, Visakhapatnam 530020, India
or mail us at sales@projectsalescorp.com. http://www.projectsalescorp.com

fax us at +91 891 2590482 or call us on +91 891 2564393; 6666482

Reply

Cancel reply

Leave a Comment

{ 2 trackbacks }

Previous post:

Next post: